This site is entirely user-supported. See how you can help.
Street View is the best available vantage point looking, if possible, towards the location of the building. In some locations, Street View may not give a view of the actual building, or may not be available at all. Where it is not available, the satellite view is shown instead.
Latitude: 54.2954 / 54°17'43"N
Longitude: -0.5142 / 0°30'51"W
OS Eastings: 496801
OS Northings: 489881
OS Grid: SE968898
Mapcode National: GBR SLVR.HZ
Mapcode Global: WHGBZ.29FF
Entry Name: Cornmill Approximately 30 Metres North of Mill Farmhouse
Listing Date: 14 April 1987
Source: Historic England
Source ID: 1168045
English Heritage Legacy ID: 327366
Location: Hackness, Scarborough, North Yorkshire, YO13
County: North Yorkshire
Civil Parish: Hackness
Traditional County: Yorkshire
Lieutenancy Area (Ceremonial County): North Yorkshire
Church of England Parish: Hackness with Harwood Dale
Church of England Diocese: York
SE 98 NE HACKNESS HACKNESS TO EVERLEY ROAD
(east side, off)
6/46 Cornmill approximately 30
metres north of Mill
Cornmill and attached outbuildings. Mid C18 raised and altered in C19.
Squared sandstone on rubble plinth, with pantile roof. 2-storey, 3-bay
Mill; attached 1½-storey, 2-bay cartshed to left and other single-storey
outbuildings further to left. Plank door to centre of mill flanked by
partly blocked fixed light windows, with tripartite herringbone-tooled
lintels. Board lifting door to centre of first floor flanked by similar
windows to ground floor, with timber lintels. Tooled stone sills to all
windows. Coped gables and shaped kneelers. Cart-shed has double slatted
doors beneath heavy timber lintels to both openings. Fixed light with
timber lintel to granary above, and coped gable to left. Mill tailrace is
carried away through a vaulted stone culvert passing under the mill
buildings. Interior: the mill machinery survives intact. Wheel chamber at
rear contains overshot iron wheel, c1890, made by J and L Horsfield of
Leeds. On the first floor the main shaft is chamfered with stops. 3 sets
of stones survive, one set French burr stones, 2 with their furniture.
Gearing for subsidiary machinery survives including a well-worn tree trunk
in the attic, which formed the spindle for the sack hoist. The mill was in
operation until 1975.
Listing NGR: SE9680189881
This text is from the original listing, and may not necessarily reflect the current setting of the building.
Other nearby listed buildings